- Catalog Home
- Exterior Accessories
- Bumper
- Bumper- Rear
Bumper- Rear
- 11-Gauge US Steel Construction
- Retain OEM Receiver Hitch And Wiring
- Pre-Cut Openings To Utilize Factory Sensors
- 100 Pct. Made In The USA
- Smitty Bilt Apollo JL/JT Rear Bumper
- Integrates The Existing Receiver Hitch
- Back Up Lights
- Back Up Sensor Holes
- Retains Receiver Hitch And Wiring Locations
- Pipe And Formed Treadplate
- Gloss Black Powder Coat
- Combination Pipe And Tread Plate Construction
- Gloss Black Powder Coat
- Back Up Lights Included
- Pre-Drilled Sensor Holes
- Retains OEM Receiver Hitch And Wiring Locations
- MADE IN THE USA
- Stainless Steel
- Weather Resistant
- Pair
- Hardware Included
- Limited 5 Year Warranty
- Classic Rock Crawling Rear Bumper
- Mount Kit Sold Separately
- Popular Diamond Tread Design
- Full Size Tongue Weight of 800 lbs. And 8000 lbs. Trailer Weight
- Downsize and Compact Are 350/3500 lb. Weights
- V5 Tested Certified To SAE J684
- Flat Black Powder Coat
- Back Up Sensor Holes
- Retain OEM Receiver Hitch And Wiring Locations
- Pipe And Formed Smooth Plate Steel
- Paintable
- Back Up Sensor Holes
- Retain OEM Receiver Hitch And Wiring Locations
- Pipe And Formed Smooth Plate Steel
- Protects Vehicle From Damage Against Wildlife And Road Debris
- Provides Added Safety To Driver And Vehicle
- Heavy Duty Diamond Plate Steel
- Honeycomb Mesh Protects Grille/Gives Maximum Airflow
- 1.5 in. Headlight Protection Tubes
- 2 in. Full Wraparound Wings Ties Into Bumper
- Provisions For Factory Parking Sensors
- 2 in. Receiver Hitch/Heavy Duty 9500 lbs. Bow Shackle Mounts
- Compatible For Factory Fog Lamps Or LED Post Mount Lights
- Custom Die Cast Riveted Logo Badge
- Mounting Provisions For License Plate
- Hardware Mounting Brackets Included
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- 1 in. Thick HS Shackle Mounts
- Two Flush Mount Led Lights Included
- License Plate Illumination Lights Included
- Laser-Cut HDX Logo On Ends
- Application Specific Designs
- Mounting Brackets Included
- Available With Or Without Provision For Back-Up Sensors
- Available In Textured Black Finish Or Raw
- Integrated Steps On Either Side Of The Tailgate
- Durable Formed 3/16in. Steel Construction
- Retain OEM Receiver Hitch And Wiring Locations
- 3/4in. D-Ring Recovery Points
- 2 Stage Black Powder Coat
- Satin Black Finish
- Massive Recovery Hooks
- Built-In Jack Lifting Points
- Limited 5 Year Warranty
- Direct Fit
- Manufactured From 3/16 and 1/4 Cold Roll Steel
- Solid Mount D-Rings Welded On The Inside And Out
- Two Stage Matte Black Finish Powder Coat Finish - 5 Year Limited Warranty
- Smittybilt Advantage Warranty
- M1A2 Modular Rear Bumper For 14-18 Chevy Silverado
- Mount Kit Included
- 2 In. Diameter Tube Frame
- Optional Class III/IV Hitch Available. Sold Separately
- Retractable License Plate Holder Conceals Receiver Hitch
- Equipped With Mount Points For Optional Auxiliary Lights
- Available For Vehicles With Or Without Backup Sensors
- Bolt-On Installation; No Drilling Required
- Signature Series Step Pad
- Complete Assembly
- Molded Polymer Step Pads
- V5 certified
- Interchangeable Components
- 3 Year Warranty
- Integrates With Existing Receiver Hitch
- Formed Steel Durability
- Gains Lower Steps And Recovery Points
- Stylish And Functional
- Integrates With Existing Receiver Hitch
- Formed Steel Durability
- Gains Lower Steps And Recovery Points
- Stylish And Functional
- Increases Ground Clearance And Angle Of Approach
- Constructed Of 10 Gauge Steel For Strength And Style
- Compatible For Blind Spot Monitors And Parking Sensors
- Accommodate For Oem Hitch And Led Back Up Lights
- Configured To Accept 2 Fm6 Led Flush Mount
- Custom Laser-Cut Westin Logo
- Hardware And Mounting Brackets Included
- Bolt-On Installation - No Drilling Required
- Aggressive Styling
- Integrated Tow Hooks And D-Ring Mounts
- Double Rung Side Step
- Fab Fours Signature Knife Edge Design
- Ease Of Installation
- Includes 16 Gauge Removable Skin
- Sensor Compatible
- 2 Integrated Pod Mounts For Reverse Lights
- Stainless Steel Hardware
- 2 Stage Matte Black Powder Coat
- 11 Gauge Steel Construction
- MADE IN THE USA
- Direct Fit
- Dual Gloss Black Powdercoat Painted Finish
- Dense Zinc Treated Undercoating
- Expertly Robotically Welded
- Bumper Bolts Directly On To Vehicle
- 2 in. Receiver Hitch
- 5 Year Limited Warranty
- Robotically Welded To Exacting Specifications
- Black Dual Powdercoat with Zinc Undercoat
- Welded One Piece Design
- Attached to Factory Mount Points
- Extremely Durable
- Tire Carrier Takes Load Off Tailgate
- Fully Adjustable
- Semi Gloss Black Powder Coat Finish
- Secures With Heavy Duty Latch
- Custom Welded Shackle Mounts
- 1 in. D Rings Included
- Gloss Black
- Allows Oversized Spare Tire
- Welded End Caps
- Limited 5 Year Warranty
- 7 Gauge Steel
- 1-Piece Fully Welded Construction
- 1 in. Thick HD Shackle Mounts
- Two Flush Mount Led Lights Included
- Welded Hitch Receiver
- Laser-Cut Snyper Logo On Ends
- Mounting Brackets Mount Directly To Frame
- Textured Black Finish
- Aggressive Design
- Winch Ready- Will Hold Up To 16.5K Winch (Depends On Vehicle)
- Perfectly Follows The Body Lines
- Side Mounting Slots And Tabs For Various Light Options
- Provides Far More Tire Clearance
- Integrated Shackle Mounts
- Black
- Tube style
- Raised Ends For Better Ground Clearance
- Built in Hitch For Accessories; Not Designed for Towing
- Limited 5 Year Warranty
- Black
- Stamped Steel
- Fits Up To 7/8 in. D-Rings; Not Included
- Efficient Stamping Process Used
- Creates A Product Lighter Than Most Aftermarket Steel Bumpers
- Sturdy 11 Gauge Powder Coated Steel Construction
- 1 Piece
- Body Width Profile
- Raised corners for better entry and exit under the most extreme conditions
- Accommodates 3X3 Cube Led Lights
- Integrated 3/4 in. D-Ring Mounts
- Class Iii Receiver Hitch
- Integrated Jack Points
- Perfect Mid Width Design
- Direct Fit
- E-Coat Undercoated With Dual Stage Textured Black Powder Coat
- Heavy-Duty 1/4 in. Steel Plate Design
- Three Point Mounting System Supports Over-Sized Tires
- Special Lock Design Keeps Tire Carrier Secure While Off-Roading
- 5 Year Limited Warranty
- New solid D-ring and jack point mount - welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- UHMW ;ultra-high-molecular-weight polyethylene to provide the ultimate protection for rock crawling
- Aux back up light cut out provided
- 3/16-inch cold rolled steel with two-stage textured matte black finish
- Powder coat finish 5 year limited warranty
- Smittybilt limited lifetime warranty
- Modular design; tire carrier can be added in the future.
- Class III hitch for true towing with towable d-ring
- Direct Fit
- Black Powder Coat
- Dense Zinc Treated Undercoating
- Two Stage Textured Black Powder Coat Finish
- Expertly Robotically Welded
- Bumpers Bolt Directly To Your Vehicle
- Bumper Is 2 in.X.120 in. Wall
- 2 in. Receiver Rated Class III 9;000 LBS.
- Standard Rear Bumper
- Not Vehicle Specific
- 3mm Deep Drawn Formed Steel
- Winch Compatible Up To 12K
- Includes Modular Wings With Light Provisions
- Integrated D-Ring and Lift Points
- Oe Fog Light Provision
- Integrated Overrider With 13 in. Lightbar Provision
- Cold Rolled Brite Steel
- OE Style Steel Step Plate
- Molded Polymer Surface
- Mount Kit Sold Separately
- 3 Year Warranty
- Functional Design
- Works With 2 in. Receiver Tow Hitch
- Contoured Corners
- Allows Clearance For Spare Tire
- Black Powdercoat Finish
- 3 Year Warranty
- Includes 2 in. Receiver Tow Hitch Made Of 1/4 in. Steel Reinforced With 7/16 in. Right
- 3rd Brake Light Bracket Included
- Steel Welded Accessory Panel Allows For Mounting A Hi-Lift Jack Or Gas Can
- Backed By A Five Year Limited Warranty
- Superior Strength And Styling
- Give Your Vehicle That Extra Cool Factor
- Two Front Side Openings Allow Light Options
- Sensor Compatible
- 11 Gauge US Steel
- RotoPax Mount
- 3/16-Inch Plate Steel Construction
- Designed To Work With Factory Or Westin Hitches
- Integrated Recovery Shackle Mount Points
- Auxiliary Light Mount Points
- Rock Light Mount Points
- 2 Off-Road Jack Points
- No Drilling Required - Bolt On Installation
- Includes Bumper; Mounting Hardware And Install Instructions
- Fits up to 37 in. tires
- Class III tow rated
- New cam-style pin adjustment
- Easy 2 finger opening latch
- Double catch latch eliminates accidental opening
- MOLLE Pals compatible to allow multiple pouch mounting configurations
- Stainless steel pivot washer for longer wear life
- 3rd brake light bracket included
- integrated gas can and jack mounts
- Bolt-on design for XRC GEN2 bumpers
- Frame pivot point for added strength
- Tuned one-handed opening operation; tuned to factory tailgate
- CB and jack mounts and Roto Pax® gas can holder
- Manufactured from 3/16 in. cold rolled steel
- Two-stage textured matte black finish
- 18-Current Wrangler JL; 2-4 Door
- Adjustable Slant Tire Carrier
- Convertible Rotopax Mount Can Be Installed In Either Straight Or Slant Tire Configurations
- Included Adjustable 3rd Brake Light Bracket
- Retains OE Camera Location And Functionality
- Removable Trail Jack And Aerial Antenna Mount
- Steel Vent Cover
- Roller Bearing Pivot
- Fits Up To 40 in. Tire; With Single-Action Open And Close Feature
- Direct Fit
- 2 And 4-Door Models
- Two Stage Matte Black Textured Powder Coat Finish
- Textured Black
- Incl. XHD Frond Winch Mount Bumper And Double-X Striker Bar
- Incl. Standard Bumper Ends
- Modular Design
- Steel
- Textured Black
- Incl. XHD Frond Winch Mount Bumper And Double-X Striker Bar
- Incl. Standard Bumper Ends
- Modular Design
- Steel